Evaluating the efficiency of the development of boundary oil rims in the depletion drive
https://doi.org/10.31660/0445-0108-2022-3-72-82
Abstract
Every year, the relevance of developing oil rims, which were not previously involved in development due to the need to use expensive technologies, is growing. However, at present time the development of oil rims is determined by the depletion of light oil reserves. The massive gas cap and the high gas factor in oil rims don't allow to accurately determine the possibility of developing an oil rim in the depletion drive. The aim of the article is to develop a tool for evaluating the effectiveness of the development of boundary oil rims in the depletion drive. The key geological and physical factors that have the greatest impact on the efficiency of the development of oil rims were identified; analogous deposits were analyzed, on the basis of which geological and hydrodynamic models were built. We evaluated the role and influence of studied factors, such as permeability, angle of inclination of the oil rim, volume of the gas cap, thickness of the oil rim. A tool has been developed to assess the effectiveness of the development of boundary oil rims in the depletion drive and the use of the tool has been demonstrated.
About the Authors
D. V. Parkhomenko
Industrial University of Tyumen
Russian Federation
Russian Federation
Dmitriy V. Parkhomenko, Student
Tyumen
G. A. Skhabitskiy
Industrial University of Tyumen
Russian Federation
Russian Federation
Gerald A. Skhabitskiy, Student
Tyumen
R. T. Apasov
Gazpromneft STC LLC
Russian Federation
Russian Federation
Renat T. Apasov, Candidate of Engineering, Head of Product Development
Tyumen
References
1. Polkovnikov, F. I. (2017). Optimizatsiya tekhnologii razrabotki tonkikh neftyanykh otorochek: magisterskaya dissertatsiya. Tyumen, 81 p. (In Russian).
2. Matyukhina, V. D. (2017). Otsenka perspektiv ispol'zovaniya tekhnologiy sozdaniya gazogidratnykh bar'erov pri razrabotke mestorozhdeniy s gazovoy shapkoy i nizkoy plastovoy temperaturoy (na primere Chayandinskogo neftegazokondensatnogo mestorozhdeniya, Vostochnaya Sibir'): magisterskaya dissertatsiya. Tomsk, 106 p. (In Russian).
3. Standing, M. B. (1947). A pressure-volume-temperature correlation for mixtures of California oils and gases. Drilling and Production Practice, pp. 275-287. (In English).
4. Corey, A. T. (1954). The interrelation between gas and oil relative permeabilities. Producers Monthly, 19(1), pp. 38-41. (In English).
5. Olamigoke, O., & Peacock, A. (2009). First-Pass Screening of Reservoirs with Large Gas Caps for Oil Rim Development. Nigeria Annual International Conference and Exhibition, Abuja, Nigeria. (In English). Available at: https://doi.org/10.2118/128603-MS
6. Krasnoborov, S. V., Gorlanov, A. A., Yushkov, A. A., Zunde, D. A., & Loznyuk, O. A. (2018). Vybor rentabel'nykh podkhodov k razrabotke maloamplitudnykh neftegazokondensatnykh zalezhey s neftyanoy otorochkoy na primere mestorozhdeniya s vostoka YANAO. Neft' i Gaz Sibiri, (4(33)), pp. 42-44. (In Russian).
7. Sugaipov, D. A., Nekhaev, S. A., Perevozkin, I. V., Reshetnikov, D. A., & Samolovov, D. A. (2019). Optimization of well pattern for oil rim fields. Oil Industry, (12), pp. 44-46. (In Russian). DOI: 10.24887/0028-2448-2019-12-44-46
Review
For citations:
Parkhomenko D.V., Skhabitskiy G.A., Apasov R.T. Evaluating the efficiency of the development of boundary oil rims in the depletion drive. Oil and Gas Studies. 2022;(3):72-82. (In Russ.) https://doi.org/10.31660/0445-0108-2022-3-72-82
Views:
273
Email this article 
Post a Comment 