The use of clay from the Herpegezh deposit for the production of ready-made compositions for the preparation of drilling fluids
https://doi.org/10.31660/0445-0108-2024-1-80-91
Abstract
The preparation of drilling fluids from ready-made compositions allows you to reduce costs, including by obtaining the drilling mud of the required composition with an optimal consumption of reagents, simplifying technological equipment and reducing requirements for the qualification of maintenance personnel. One of the most common components of drilling fluids are clays, therefore, one of the important tasks is to study clays from various deposits in order to establish the possibility of their use in the production of compositions for the preparation of drilling fluids. The purpose of this study was to establish the chemical and technological characteristics of the clays of the Herpegezh deposit and to develop recommendations for the preparation of finished compositions. Particular attention was paid to the choice of the method of activation of raw materials, ensuring the maximum possible productivity, in particular, the traditional method of activation and mechanical activation in the disintegrator were compared. Also, as a result of the conducted experiments and processing of their results, the dependences of the technological characteristics of the drilling mud prepared from the Herpegezh clays on the mass fraction of the clay substance were established.
About the Authors
I. I. Bosikov
North Caucasian Institute of Mining and Metallurgy (State Technological University
Russian Federation
Russian Federation
Igor I. Bosikov, Candidate of Engineering, Associate Professor at the Department of Oil and Gas Business, North Caucasian Institute of Mining and Metallurgy (State Technological University), Vladikavkaz
A. I. Mazko
North Caucasian Institute of Mining and Metallurgy (State Technological University
Russian Federation
Russian Federation
Alexander I. Mazko, Candidate of Engineering, Associate Professor at the Department of Oil and Gas Business, North Caucasian Institute of Mining and Metallurgy (State Technological University), Vladikavkaz
Yu. U. Safaraleeva
Industrial Institute (branch) of Yugra State Universit
Russian Federation
Russian Federation
Yulia U. Safaraleeva, Candidate of History, Associate Professor, Industrial Institute (branch) of Yugra State University, Nefteyugansk
References
1. Bulatov, A. I., Makarenko, P. P., & Proselkov, Yu. M. (1999). Burovye promyvochnye i tamponazhnye rastvory. Mosсоw, Nedra Publ., 424 p. (In Russian).
2. Reznichenko, I. N. (1982). Prigotovlenie, obrabotka i ochistka burovykh rastvorov. Moscow, Nedra Publ., 230 p. (In Russian).
3. Ryazanov, Ya. A. (2005). Entsiklopediya po burovym rastvoram. Orenburg, Letopis' Publ., 664 p. (In Russian).
4. Lityaeva, Z. A., & Ryabchenko, V. I. (1992). Glinoporoshki dlya burovykh rastvorov. Moscow, Nedra Publ., 192 p. (In Russian).
5. Sharova, O. Yu., Mulyukov, R. A., Kuznetsova, N. Yu., Samsykin, A. V., Khafizov, A. F., & Kutluguzhina, Z. M. (2010). Perspektivy primeneniya burovykh rastvorov, prigotovlennykh na osnove sukhikh smesey. Proceedings of the III International Scientific and Technical Conference. China-Russian scientific and technical collaboration. Science-education-innovation. Ufa, Ufa State Aviation Technical University Publ., pp. 91-92. (In Russian).
6. Kravets, V. N. (1979). Khranenie i ispol'zovanie poroshkoobraznogo materiala dlya prigotovleniya burovykh rastvorov. Moscow, VNIIOENG Publ., 179 p. (In Russian).
7. Denisov, P. I., & Zhvanetskiy, E. F. (1964). Proizvodstvo i prigotovlenie glinoporoshkov v burenii. Mosсоw, Nedra Publ., 110 p. (In Russian).
8. Savilova, G. N. (1999). Sukhie smesi novye vozmozhnosti v stroitel'stve. Stroitel'nye materialy, (2), pp. 20-22. (In Russian).
9. Kozlov, V. V. (2000). Sukhie stroitel'nye smesi. Moscow, Assotsiatsiya stroitel'nykh vuzov Publ., 96 p. (In Russian).
10. Gorodnov, V. D., Teslenko, V. N., Timokhin, I. M., Kolesnikov, P. I., & Chelombiev, B. K. (1975). Issledovanie glin i novye retseptury glinistykh rastvorov. Moscow, Nedra Publ., 271 p. (In Russian).
11. Gavrilov, S. N., Lityaeva, Z. A., Allik, A. E., & Pal'chikova, L. S. (1987). Primenenie dezintegratornoy tekhnologii dlya polucheniya sukhogo burovogo rastvora. Dezintegratornaya tekhnologiya. Tezisy dokladov V Vsesoyuznogo seminara. Tallin, NPO "Dezintegrator", pp. 104. (In Russian).
12. Izmukhambetov, B. S. (1994). Razrabotka dezintegratornoy tekhnologii polucheniya i primeneniya poroshkoobraznykh materialov iz mestnogo syr'ya dlya bureniya skvazhin v slozhnykh geologicheskikh usloviyakh zapadnogo Kazakhstana. Diss. … kand. tekhn. nauk. Ufa, 195 p. (In Russian).
13. Izmukhambetov, B. S., Karimov, N. Kh., Agzamov, F. A., & Mavlyutov, M. R. (1998). Primenenie dezintegratornoy tekhnologii v neftegazovoy promyshlennosti. Samara, 150 р. (In Russian).
14. Gaydarov, M. M-R. (2009). Nauchno-prakticheskie osnovy polucheniya burovykh rastvorov i regulirovaniya ikh tekhnologicheskikh svoystv mekhano-khimicheskim vozdeystviem. Diss. … dokt. tekhn. nauk. St. Petersburg, 200 p. (In Russian).
15. Sannikov, R. Kh. (2004). Planirovanie inzhenernogo eksperimenta. Ufa, Ufa State Petroleum Technological University Publ., 78 p. (In Russian).
16. Lityaeva, Z. A., Ryabchenko, V. I., Shishov, V. A., & Baranovskiy, V. D. (1979). Reglamentirovanie svoystv glinoporoshkov, ispol'zuemykh dlya prigotovleniya burovykh rastvorov. Moscow, VNIIOENG Publ., 48 p. (In Russian).
Review
For citations:
Bosikov I.I., Mazko A.I., Safaraleeva Yu.U. The use of clay from the Herpegezh deposit for the production of ready-made compositions for the preparation of drilling fluids. Oil and Gas Studies. 2024;(1):80-91. (In Russ.) https://doi.org/10.31660/0445-0108-2024-1-80-91
Views:
781
Email this article 
Post a Comment 