LONGITUDINAL CROWNING OF THE GEAR TOOTH SURFACE OF STRAIGHT BEVEL GEARS WITH A SMALL SHAFT ANGLE WITHNON-GENERATED GEAR AND GENERATED PINION
https://doi.org/10.31660/0445-0108-2016-3-122-129
Abstract
The aim of this thesis is to develop computer program shows generating process of the longitudinal-crowned gear for straight bevel gears with a small shaft angle with non-generated gear and generated pinion. The purpose of computer program is the simulation of meshing and contact of the gear tooth surface with longitudinal crowning and straight pinion tooth surface with localized bearing contact.
About the Authors
A. A. Pazyak
Industrial University of Tyumen
Russian Federation
Russian Federation
V. N. Syzrantsev
Industrial University of Tyumen
Russian Federation
Russian Federation
References
1. Патент № 2529943 на изобретение «Соосный редуктор», F16H 1/32, F04B 47/02, F04C2/107 / Ю. Г. Денисов, В. Н. Сызранцев, В. П. Вибе. Заявка № 2013117492/11, зарегистрировано в Государственном реестре изобретений Российской Федерации 10.10.2014, Бюл. 28, RU
2. Syzrantsev, V. & Kotlikova V. (2000) Mathematical and program provision of design of bevel gearing with small shaft angle. Proceedings of the International Conference on Gearing, Transmissions, and Mechanical Systems: 3-6, July, Nottingham Trent University, UK. - Pp.13-18.
3. Syzrantsev, V., Syzrantseva, K. & Pazyak, A. (2015). Method of Loading Capacity Calculation of Bevel Precessional. Gear for Pipeline Valve Drives. Journal of Engineering and Sciences, Volume: 10, Issue: 8, Page No: pp. 243-246. DOI: 10.3923/jeasci.2015.243.246.
4. Syzrantsev, V., Denisov, J., Wiebe, V. & Pazyak, A. (2015) The Design and Production of Drives Based on Pan Precess Gear for Oil and Gas Machinery. ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 10: ASME 2015. Paper No. DETC2015-47096, pp. V010T11A057; 8 pages doi:10.1115/DETC2015-47096.
5. Litvin, F. L., & Gutman, Y. (1981). Methods of Synthesis and Analysis for Hypoid Gear Drives of Formate and Helixform. Parts 1, 2, and 3. ASME Journal of Mechanical Design, Vol.103, No 1, pp.83-113.
6. Сызранцев В. Н. Расчет геометрических характеристик полуобкатной прямозубой плоскоконической передачи / В. Н. Сызранцев, К. В. Сызранцева, А. А. Пазяк // Интеллектуальные системы в производстве. - 2015.- № 2 - С. 76-79.
7. Syzrantsev, V. N., Syzrantseva, K. V. & Pazyak, A. A. (2015) Calculating geometric parameters of the semi-rolled straight pan gear. Proceedings of the 6th International Symposium on Industrial Engineering - SIE 2015: 24-25, September, Belgrade, Serbia. - Pp.334-337.
8. Litvin, F. L. (1998) Development of Gear Technology and Theory of Gearing: NASA Reference Publication, 1406.- 124 p.
9. Лопато Г. А. Конические и гипоидные передачи с круговыми зубьями. Справочное пособие / Г. А. Лопато, Н. Ф. Кабатов, М. Г. Сегаль. - М.: Машиностроение, 1977. - 423 с.
Review
For citations:
Pazyak A.A., Syzrantsev V.N. LONGITUDINAL CROWNING OF THE GEAR TOOTH SURFACE OF STRAIGHT BEVEL GEARS WITH A SMALL SHAFT ANGLE WITHNON-GENERATED GEAR AND GENERATED PINION. Oil and Gas Studies. 2016;(3):122-129. (In Russ.) https://doi.org/10.31660/0445-0108-2016-3-122-129
Views:
367
Email this article 
Post a Comment 