INTERPRETATION OF PRESSURE BEHAVIOR DIAGRAMS USING REMI’S STANDARD CURVES AND OTHER METHODS IN OIL WELLS
https://doi.org/10.31660/0445-0108-2015-4-45-51
Abstract
The authors analyze the dimensionless pressure and the inflow rate using Remi’s curves and other standard curves for determination of reservoir permeability and characteristics of the tested well damage and stimulation.
About the Authors
Mohammed Jawad Zein Al-Abideen
Tyumen State Oil and Gas University
Russian Federation
Russian Federation
Faiq Caad
Tyumen State Oil and Gas University
Russian Federation
Russian Federation
M. L. Karnaukhov
Tyumen State Oil and Gas University
Russian Federation
Russian Federation
Sh. J. Mirboboev
Tyumen State Oil and Gas University
Russian Federation
Russian Federation
References
1. Ramey H. J. Jr., Agarwal R. and Martin, I.: «Analysis of Slug Test or DST Flow Period Data», J. Cdn. Pet. Tech.(July-September 1975) 37
2. Grader A. S. and Ramey, H. J. Jr.: «Slug-Test Analysis in Double-Porosity Reservoirs», SPEFE (June1988) 329
3. Rushing J. A. et al.: «Analysis of Slug Test Data From Hydraulically Fractured Coalbed Methane Wells» paper SPE21492 presented at the 1991 SPE Gas Technology Symposium, Houston, 23-25 January
4. Karsaki K., Long, J. C. S., and Witherspoon, P. A.: «Analytical Models of Slug Tests», Water Resources Research J. (1988) 24, No.1, 115
5. Карнаухов М. Л., Пьянкова Е. М. Современные методы гидродинамических исследований скважин. - М.: Инфра-Инженерия, 2010
Review
For citations:
Zein Al-Abideen M.J., Caad F., Karnaukhov M.L., Mirboboev Sh.J. INTERPRETATION OF PRESSURE BEHAVIOR DIAGRAMS USING REMI’S STANDARD CURVES AND OTHER METHODS IN OIL WELLS. Oil and Gas Studies. 2015;(4):45-51. (In Russ.) https://doi.org/10.31660/0445-0108-2015-4-45-51
Views:
429
Email this article 
Post a Comment 