Studying of methods to improve the accuracy of process parameters in deep-well drilling
https://doi.org/10.31660/0445-0108-2019-4-100-112
Abstract
The article deals with the studying of methods to improve the accuracy of process parameters in deep-well drilling. The algorithmic methods of increasing the accuracy of measuring the weight of drilling tool and the axial load on the bit, in particular, the method of standard measures and test methods are proposed. Methods are described for measuring the displacement of the drill string by the rotation angle of the pulley-block unit. A fundamentally new method of measuring the position of the upper end of the drill string by hydrostatic pressure and the method of measuring the mechanical speed of drilling are considered. The scheme of the automatic tracking system, which implements an integral method for measuring the drilling speed, characterized by high noise immunity, is presented.
About the Authors
V. A. Kuznetsov
Samara State Technical University
Russian Federation
Russian Federation
Vladimir A. Kuznetsov, Candidate of Engi-neering, Associate Professor at the Department of Information and Measuring Equipment
Samara
S. A. Mikheev
Samara State Technical University
Russian Federation
Russian Federation
Sergey A. Mikheev, Postgraduate at the De-partment of Information and Measuring Equip-ment
Samara
References
1. Kuznetsov, V. A., & Mikheew, S. A. (2017). Problems of measuring of motion parameters of the drill string. Oil and Gas Studies, (5), pp. 66-71. (In Russian). DOI: 10.31660/0445-0108-2017-5-66-71
2. Demikhov, V. I., & Leonov, A. I. (1980). Kontrol'no-izmeritel'nye pribory pri burenii skvazhin. Moscow, Nedra Publ., pp. 142-143. (In Russian).
3. Kuznetsov, V. A., Evdokimov, V. N., & Faleeva, M. V. (1985). A. S. 1416677 SSSR, MKI3 E21 V45/00. Ustroystvo dlya peredachi informatsii. No. 3925995/22-03. Applied: 11.07.85. (In Russian).
4. Brazhnikov, V. A., & Kuznetsov, V. A. (1978). Informatsionnye ustroystva dlya opredeleniya effektivnosti upravleniya protsessom bureniya. Moscow, Nedra Publ., 146 p. (In Russian).
5. Kuznetsov, V. A. A. S. 907226 SSSR. Ustroystvo dlya izmereniya mekhanicheskoy skorosti bureniya. (In Russian).
Review
For citations:
Kuznetsov V.A., Mikheev S.A. Studying of methods to improve the accuracy of process parameters in deep-well drilling. Oil and Gas Studies. 2019;(4):100-112. (In Russ.) https://doi.org/10.31660/0445-0108-2019-4-100-112
Views:
401
Email this article 
Post a Comment 