Analysis of the application of jet pumps in the field development in Western Siberia
https://doi.org/10.31660/0445-0108-2020-1-95-105
Abstract
Currently, the use of jet devices in the oil and gas industry is constantly expanding. The reason for this expansion in the oil and gas industry is the presence of a number of advantages. One of the advantages is the compactness of the working section. Other advantages of the jet pump are the simplicity of its de-sign, high reliability and unique technical capabilities when pumping gas-liquid mixtures, the absence of moving mechanical parts, low criticality to the content of mechanical impurities and viscosity of the extracted liquid.
The aim of the study is to analyze the use of jet devices during well develop-ment in Western Siberia.
About the Authors
G. A. Shlein
Industrial University of Tyumen
Russian Federation
Russian Federation
Gennady A. Shlein - Candidate of Engineering, Associate Professor at the Department of Drilling Oil and Gas Wells, Industrial University of Tyumen.
Tyumen.
V. G. Kuznetsov
Industrial University of Tyumen
Russian Federation
Russian Federation
Vladimir G. Kuznetsov - Doctor of Engineering, Professor at the Department of Drilling Oil and Gas Wells, Industrial University of Tyumen.
Tyumen.
A. B. Baah
Industrial University of Tyumen
Russian Federation
Russian Federation
Augustine Boateng Baah - Student, Industrial University of Tyumen.
Tyumen.
E. G. Grechin
Industrial University of Tyumen
Russian Federation
Russian Federation
Evgeny G. Grechin - Doctor of Engineering, Professor at the Department of Applied Mechanics, Industrial University of Tyumen.
Tyumen.
References
1. Sazonov, Yu A., Kazakova, E. S., Dimaev, T. N., & Myasishchev, A. A. (2012). Struynye nasosy dlya perekachki mnogofaznykh sred. Upravlenie kachestvom v neftegazovom komplekse, (4), pp. 35. (In Russian).
2. Bulatov, A. I., Savenok, O. V., & Yaremiychuk, R. S. (2016). Nauchnye osnovy i praktika osvoeniya neftyanykh i gazovykh skvazhin. Krasnodar, Publishing House - South, 576 p. (In Russian).
3. Matthews, C. S., & Russell, D. G. (1967). Pressure Buildup and Flow Tests in Wells. New York-Dallas, Society of Petroleum Engineers of AIME, 165 p. (In English).
4. Van Poollen, H. K. (1961). Status of Drill-Stem Testing Techniques and Analysis. Journal of petroleum technology. April 1961 Issue, pp. 333-339. (In English).
5. Shlein G. A., Yagafarov, A. K., Fedortsov, V. K., & Kleshchenko, I. I. (2011). Osvoenie i issledovanie neftyanykh skvazhin struynymi apparatami. Tyumen, Vektor Buk Publ., 192 p. (In Russian).
6. Sokolov, E. Ya., & Zinger, N. M. (1989). Struynye apparaty. 3rd edition, revised. Moscow, Energoatomizdat Publ., 352 p. (In Russian).
7. Drozdov, A. N. (2008). The Technology and technique of oil production by submergible pumps in the complicated conditions. Moscow, MAKS Press Publ., 309 p. (In Russian).
8. Lyamaev, B. F. (1988). Gidrostruynye nasosy i ustanovki. Leningrad, Mashinostroenie Publ., Leningradskoe otdelenie, 256 p. (In Russian).
9. Podvidz, L. G., & Kirilovskiy, Yu. L. (1968). Raschet struynykh nasosov i ustanovok. Trudy VIGM, (38), pp. 44-97. (In Russian).
10. Yaremiychuk, R. S., & Kachmar, Yu. D. (1982). Vskrytie produktivnykh gorizontov i osvoenie skvazhin. Lviv, 214 p. (In Russian).
11. Kleshchenko, I. I., Shenberger, V. M., Shlein, G. A., Yagafarov, A. K., Leontiev, D. S., & Popova, Zh. S. (2015). Teoriya i praktika stroitel'stva bokovykh stvolov v neftyanykh skvazhinakh: osvoenie i issledovanie struynymi apparatami. Tyumen, Tyumen State Oil and Gas University Publ., 352 p. (In Russian).
12. Yaremiychuk, R. S., Voznyy, V. R., Kifor, B. M., & Lotovskiy, V. N. (1992). Tekhnologiya povysheniya produktivnosti skvazhin s pomoshch'yu struynykh apparatov: NTS. Ser. Stroitel'stvo neftyanykh i gazovykh skvazhin na sushe i na more. Moscow, VNIIOENG Publ., 328 p. (In Russian).
13. Yagafarov, A. K., Kleshchenko, I. I., Zozulya, G. P., Zeygman, Yu. V., Rogachev, M. K., & Shlein, G. A. (2010). Razrabotka neftyanykh i gazovykh mestorozhdeniy. Tyumen, Tyumen State Oil and Gas University Publ., 396 p. (In Russian).
14. Puti povysheniya effektivnosti ispol'zovaniya skvazhin na mestorozhdeniyakh Zapadnoy Sibiri: trudy ZapSibNIGNI. (1985). Vypusk. 66. Tyumen, ZapSibNIGNI Publ., 343 p. (In Russian).
15. Shlein, G. A. (2008). Sovershenstvovanie i razrabotka novykh tekhnologiy osvoeniya neftyanykh skvazhin s pomoshch'yu struynykh apparatov na mestorozhdeniyakh Zapadnoy Sibiri. Avtoref. diss. kand. tekhn. nauk. Tyumen, 22 p. (In Russian).
16. Fedortsov, V. K., Yagafarov, A. K., & Klevtsur, A. P. (1988). Prakticheskie ukazaniya po ispytaniyu poiskovykh i razvedochnykh skvazhin na neft' i gaz. CHast' 2. Osvoenie skvazhin, intensifikatsiya pritokov iz porovykh kollektorov. Tyumen, Glavtyumen'geologiya; ZapSibBurNI-PI Publ., 365 p. (In Russian).
17. Shlein, G. A. (2004). Ispytanie i issledovanie slabostsementirovannykh plastov, nasyshchennykh vysokovyazkimi neftyami na Russkom mestorozhdenii (Yamalo-Nenetskiy avtonomnyy okrug). Dobycha, podgotovka, transport nefti i gaza: ІІІ Vserosciyskaya nauchno-prakticheskaya konferentsiya (September 20-24, 2004). Tomsk, pp. 189-193. (In Russian).
18. Shlein, G. A., Gazimov, R. R., & Iripkhanov, R. D. (2000). Primenenie vibratsionno-tsiklicheskikh metodov intensifikatsii pritokov i vosstanovleniya priemistosti pri osvoenii skvazhin. Oil Industry, (9), pp. 76-79. (In Russian).
19. Yagafarov, A. K., Kuramshin, R. M., & Demichev, S. S. (2000). Intensifikatsiya pritokov nefti iz skvazhin na mestorozhdeniyakh Zapadnoy Sibiri. Tyumen, Slovo Publ., 223 p. (In Russian).
20. Shlein, G. A. (1986). Perspektivy primeneniya struynykh nasosov pri kompleksnom vozdeystvii na prizaboynye zony plastov v razvedochnykh skvazhinakh Zapadnoy Sibiri. Sovremennye tekhnologii i tekhnicheskie sredstva, povyshayushchie tekhniko-ekonomicheskie pokazateli stroitel'stva neftegazovykh skvazhin: tezisy dokladov nauchno-prakticheskoy konferentsii molodykh uchenykh i spetsialistov. "Glavtyumen'geologiya", NTO "Gornoe", ZapSibBurNIPI. Tyumen, pp. 56-58. (In Russian).
21. Buzinov, S. N., & Umrikhin, I. D. (1984). Gidrodinamicheskie metody issledovaniya skvazhin i plastov. Moscow, Nedra Publ., 269 p. (In Russian).
22. McAlister, J. A., Nutter, B. P., & Lebourg, M. (1965). A New System of Tools for Better Control and Interpretation of Drill-Stem Tests. Journal of petroleum technology, 17(2), pp. 207-214. (In English). DOI: 10.2118/965-PA
23. Edwards, A. G., & Winn, R. H. (1973). A Summary of Modern Tools and Techniques Used in Drill Stem Testing. Duncan, Oklahoma, Halliburton Services. (In English).
24. Testers, J. (1974). Review of Basic Formation Evaluation. Houston, Texas, Johnston Schlumberger, 29 p. (In English).
25. Khanin, A. A. (1969). Porody-kollektory nefti i gaza i ikh izuchenie. Moscow, Nedra Publ., 368 p.
Review
For citations:
Shlein G.A., Kuznetsov V.G., Baah A.B., Grechin E.G. Analysis of the application of jet pumps in the field development in Western Siberia. Oil and Gas Studies. 2020;(1):95-105. (In Russ.) https://doi.org/10.31660/0445-0108-2020-1-95-105
Views:
490
Email this article 
Post a Comment 