Scientific and technological aspects and prospects for application of cryogenic drilling technology
https://doi.org/10.31660/0445-0108-2020-3-54-62
Abstract
In the article, we analyze types of drilling mud, which are used to drilling intervals of permafrost rocks; the importance of wellbore stability is noted. Wedescribethemain technologies, which have been being applied in the north of Western Siberia; these technologies are aimed at minimizing the loss wellbore stability due to violation of the temperature conditions in the well. We also analyze hydrocarbon systems, taking into account foreign experience, which is based on prospecting and exploratory drilling of ice deposits in Greenland and Antarctica. The article draws your attention to using synthetic fluids, monoesters and chladones. The difficulties of the existing technology and the disadvantages of the hydrocarbon systems are highlighted. We propose to apply a new cryogenic drilling technology, which consists in the use of synthetic fluorine-containing agents as flushing fluid at low temperatures. The text gives valuable information on composition of the proposed flushing fluid and the prospects of using the technology to prevent complications. Much attention is given to issue of manufacturing the main chemical reagent with the reduction of the generalized production chain of its production from the starting material, it is fluorspar.
About the Authors
A. B. Tulubaev
Industrial University of Tyumen
Russian Federation
Russian Federation
Andrey B. Tulubaev, Candidate of Engineering, Associate Professor at the Department of Drilling Oil and Gas Wells
Tyumen
E. V. Panikarovskii
Industrial University of Tyumen
Russian Federation
Russian Federation
Evgeny V. Panikarovskii, Candidate of Engineering, Associate Professor at the Department of Drilling Oil and Gas Wells
Tyumen
References
1. Tulubaev, A. B. (2018). Tekhnologiya kriogennogo bureniya neftyanykh i gazovykh skvazhin. Sostoyanie, tendentsii i problemy razvitiya neftegazovogo potentsiala Zapadnoy Sibiri: sbornik materialov mezhdunarodnoy akademicheskoy konferentsii. Tyumen, Industrial University of Tyumen Publ., pp. 145-149. (In Russian).
2. Afanas'ev, I. V. (2018). Preduprezhdenie rastepleniya kriolitozony pri burenii skvazhiny. Opyt, aktual'nye problemy i perspektivy razvitiya neftegazovogo kompleksa. Materialy VIII mezhdunarodnoy nauchno-prakticheskoy konferentsii obuchayushchikhsya, aspirantov i uchenykh: v 2 tomakh. Tyumen, Industrial University of Tyumen Publ., pp. 17-23. (In Russian).
3. Gritsenko, А. I., Kuligin, А. V., Ivakin R. А. & Griguletsky, V. G. (2014). Urgent problems of well drilling technologies applied at fields of JSC "Gazprom". Part 1. Construction of Oil and Gas Wells on Land and Sea, (3), pp. 4-15. (In Russian).
4. Kuznetsov, V. G., Ovchinnikov, V. P., Frolov, A. A., Kucheryuk, V. I., Sorokin, V. F., & Ivanov, S. I. (2003). Napryazhenno-deformirovannoe sostoyanie krepi skvazhin v kriolitozone. Tyumen, Nedra Publ., 154 p. (In Russian).
5. Maksimov, М. S., Panishev, S. V. & Kozlov, D. S. (2018). Laboratory researches of the strength of adfreezed rocks on shear. Advances in current natural sciences, (5), pp. 114-119. (In Russian). DOI: 10.17513/use.36764
6. Iakovlev, А. А., Turitsyna, Е. V., & Mogil'nikov, М. V. (2014). Analysis and justification of selecting cleaning agents and technology of their application in permafrost well drilling. Perm Journal of Petroleum and Mining Engineering, (12), pp. 22-32. (In Russian). DOI: 10.15593/2224-9923/2014.12.3
7. Shu-qing, Hao. (2011). A study to optimize drilling fluids to improve borehole stability in natural gas hydrate frozen ground. Journal of Petroleum Science and Engineering, 76(3-4), pp. 109-115. (In English). DOI: 10.1016/j.petrol.2011.01.014
8. Khomik, M. V., Kashkarov, N. G., & Porshevnikov, N. N. (1976). Sravnitel'naya otsenka promyvochnykh zhidkostey dlya bureniya v usloviyakh Kraynego Severa. Burenie skvazhin na gazovykh mestorozhdeniyakh Zapadnoy Sibiri. Tyumen, ZapsibNIGNI Publ., pp. 79-82. (In Russian).
9. Ovchinnikov, V. P., Frolov, A. A., Shatov, A. A., Vyahirev, V. I., Sorokin, V. F. & Ovchinnikov, P. V. (2000). Solevye i tamponazhnye kompozitsiii na osnove vtorichnykh material'nykh resursov proizvodstva sody. Moscow, Nedra Publ., 214 p. (In Russian).
10. Shevchenko, A. N. (2011). Effect of the well temperature regime on the drilling efficiency of frozen massifs. Proceedings of Irkutsk State Technical University, (11(58)), pp. 117-120. (In Russian).
11. Goodge, J. W., & Severinghaus, J. P. (2016). Rapid Access Ice Drill: a new tool for exploration of the deep Antarctic ice sheets and subglacial geology. Journal of Glaciology, 62(236), pp. 1049-1064. (In English). DOI: 10.1017/jog.2016.97
12. Talalay, P., Hu, Zh., Xu, H., Yu, D., Han, L., Junjie, H., & Wang, L. (2014). Environmental considerations of low-temperature drilling fluids. Annals of Glaciology, 55(65), pp. 31-40. (In English). DOI: 10.3189/2014AoG65A226
13. Wang, Z., Wang, X., Sun, B., Deng, X., Zhao, Y., Gao, Y., & Li, H. (2017). Analysis on wellhead stability during drilling operation in arctic permafrost region. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE 36. Volume. 8. Polar and Arctic Sciences and Technology; Petroleum Technology. - Ser. ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2017. (In English). Available at: https://doi.org/10.1115/omae2017-61868
14. Sheldon, S. G., Popp, T. J., Hansen, S. B., & Steffensen, J. P. (2014). Promising new borehole liquids for ice-core drilling on the East Antarctic high plateau. Annals of Glaciology, 55(68), pp. 260-270. (In English). DOI: 10.3189/2014AoG68A043
15. Talalay, P. (2011). Drilling fluids for deep coring in central Antarctica. Technical Report PRC 12-01. Polar Research Center, Jilin University, China. (In English). Available at: https://icedrill.org/sites/default/files/DRILLING-FLUIDS-Final_PRC-12-01.pdf
16. Gerasimoff, M. (2003). Drilling fluid observations and recommendations for U.S. Polar Program, WAIScores Drilling Project. Madison. (In English). Available at: http://www.ssec.wisc.edu/icds/reports/Drill_Fluid.pdf
17. Tuma, P. E. (2008). Fluoroketone C2F5C(O)CF(CF3)2 as a Heat Transfer Fluid for Passive and Pumped 2-Phase Applications. 24th IEEE SEMI-THERM Symposium. (In English). DOI: 10.1109/STHERM.2008.4509386
18. Barabanov, V. G., Babenko, Yu. I., Bispen, T. A., Vasil'ev, A. S., Matalin, V. A., Moldavskiy, D. D., & Fenichev, I. M. Sposob polucheniya perftoretilizopropilketona v reaktore ideal'nogo vytesneniya. Pat. RU 2460717. Applied: 06.12.10. Published: 10.09.12. (In Russian).
19. Bispen, Т. А., Maslennikov, I. G., Moldavsky, D. D., & Fenichev, I. M. (2016). Production of perfluoroethylisopropylketone from hexafluoropropene. Bulletin of the Saint Petersburg State Institute of Technology (Technical University), (37(63)), pp. 29-31. (In Russian).
20. Zakharenko, V. N., Krakovetskiy Yu. К., Parnachev, V. P. & Popov, L. N. (2012). On conductivity of permafrost. Tomsk State University Journal, (359), pp. 182-187. (In Russian).
21. Timofeev, N. G., Skryabin, R. M., Pinigin, V. V. (2017). About temperature during drilling in cryolithozone. Vestnik of North-Eastern Federal University. Series "Earth Sciences", (3(07)), pp. 54-61. (In Russian).
Review
For citations:
Tulubaev A.B., Panikarovskii E.V. Scientific and technological aspects and prospects for application of cryogenic drilling technology. Oil and Gas Studies. 2020;(3):54-62. (In Russ.) https://doi.org/10.31660/0445-0108-2020-3-54-62
Views:
553
Email this article 
Post a Comment 