Catalytic reforming and compounding processes as methods for increasing the octane number in gasoline, used on an industrial scale
https://doi.org/10.31660/0445-0108-2020-3-89-99
Abstract
The article discusses the urgent problem of industrial methods for increasing the octane number that improve the quality of gasoline produced. These methods include the processes of catalytic reforming and compounding of gasoline. Reforming from "to reform" (English) — to remodel, to improve. Reformate, depending on the production technology and composition of the raw material, may contain up to 70 % of the mass. aromatic hydrocarbons. Attention to this problem is due to the tightening of environmental requirements for the quality of motor fuel that must comply with modern standards. An effective solution to this problem is to model refining processes with programming. In this article, we apply methods of correlation and regression analysis. Using these methods, you can establish the relationship between two or more variables, thus finding the most effective solution to both technological and economic issues.
About the Authors
O. P. Deryugina
Industrial University of Tyumen
Russian Federation
Russian Federation
Olga P. Deryugina, Candidate of Engineering, Associate Professor at the Department of Oil and Gas Processing
Tyumen
S. V. Mechik
Industrial University of Tyumen
Russian Federation
Russian Federation
Sofya V. Mechik, Senior lecturer at the Department of Business Informatics and Mathematics
Tyumen
E. A. Trapeznikov
Industrial University of Tyumen
Russian Federation
Russian Federation
Evgeny A. Trapeznikov, Student
Tyumen
References
1. Glenn, N. (1996). Evaluation of an Octane Analyzer. American Laboratory News. (In English).
2. Lanza, E. (1983). Determination of Moisture, Protein, Fat and Calories in Raw Pork and Beef by Near Infared Spectroscopy. Journal of Food Science, 48(2), pp. 471-474. (In English). DOI: 10.1111/j.1365-2621.1983.tb10769.x
3. Norris, K. H. (1983). Instrumental Techniques for Measuring Quality of Agricultural Crops. Post-Harvest Physiology and Crop Preservation, pp. 471-484. (In English). DOI: 10.1007/978-1-4757-0094-7_22
4. Norris, K. H. (1985). Reflectance Spectroscopy. Modern Methods of Food Analysis, pp. 167-186. (In English). DOI: 10.1007/978-94-011-7379-7_8
5. Conway, J. M. (1987). Noninvasive body composition in humans by near infrared interactance. In vivo body composition studies, pp. 163-170. (In English).
6. Emel'yanov, V. M. (2004). Puti povysheniya kachestva vyrabatyvaemykh avtomobil'nykh benzinov. Neftepererabotka i neftekhimiya, (10), pp. 6-8. (In Russian).
7. Kapustin, V. M. (2005). Problems in increasing the quality of russian gasolines. Chemistry and Technology of Fuels and Oils, 41(2), pp. 93-97. (In English).
8. Kuzichkin, A. A. (2018). Adaptivnaya sistema upravleniya tekhnologicheskim protsessom riforminga s identifitsiruemoy model'yu. Diss. kand. tekhn. nauk. Samara, 191 p. (In Russian).
9. Glazov, G. I., & Sidorin, V. P. (1981). Kataliticheskiy riforming i ekstraktsiya aromaticheskikh uglevodorodov. Moscow, Khimiya Publ., 188 p. (In Russian).
10. Gulyaev, V. A., Lastovkin, G. A., Ratner, E. M., & Tarabrina, E. I. (1984). Promyshlennye ustanovki kataliticheskogo riforminga. Leningrad, Khimiya Publ., 232 p. (In Russian).
11. Karpov, S. A., Tsarev, A. V., & Kokhanov, S. I. (2005). Uluchshenie ekspluatatsionnykh svoystv motornykh topliv volnovymi vozdeystviyami. Neftegazovye i khimicheskie tekhnologii: tezisy dokladov III Vserossiyskoy nauchno-prakticheskoy konferentsii (Samara, October 25-26, 2005). Samara, p. 134. (In Russian).
12. Kuz'mina, R. I. (Ed.). (2010). Kataliticheskiy riforming uglevodorodov. Saratov, SUI MVD Rossii Publ., 252 p. (In Russian).
13. Kayumov, J., & Nurullaev, Sh. (2017). The development of new oxygen-containing highoctane fuel compositions. Universum: tekhnicheskie nauki, (7(40)), pp. 2-6. (In Russian). Available at: http://staff.tiiame.uz/storage/users/120/articles/Jdgj42GoZFXT36spFh4oBdKhyRw1XA7sO26JwreF.pdf
14. Kondrashova, N. K., Kondrashov, D. O., & Abdul'minev, A. D. (2008). Tekhnologicheskie raschety i teoriya kataliticheskogo riforminga benzina. Ufa, Monografiya Publ., 160 p. (In Russian).
15. Kokhanov, S. I. (2006). Razrabotka i issledovanie antidetonatsionnykh dobavok dlya avtomobil'nykh benzinov. Diss. kand. tekhn. nauk. Moscow, 189 p. (In Russian).
16. Lastovkin, G. A., Radchenko, E. D., & Rudin, M. G. (1986). Spravochnik neftepererabotchika. Leningrad, Khimiya Publ., 649 p. (In Russian).
17. Leffler, W. L. (1985). Petroleum Refining for the non-technical person. 2nd edition, revised. Tulsa, Oklahoma, Pennwell Corp., 172 p. (In English).
18. Lyu, Sin'chzhou. (2004). Tekhnologiya CDHydro dlya uluchsheniya ekologicheskikh kharakteristik avtomobil'nykh benzinov. Avtoref. diss. kand. tekhn. nauk. Ufa, 24 p. (In Russian).
19. Lyu, Sin'chzhou, Chzhao, Lin', & Rakhimov, M. N. (2001). Metanol-perspektivnyy komponent benzina. Promyshlennaya ekologiya. Problemy i perspektivy: materialy nauchnoprakticheskoy konferentsii. Ufa, pp. 118-119. (In Russian).
Review
For citations:
Deryugina O.P., Mechik S.V., Trapeznikov E.A. Catalytic reforming and compounding processes as methods for increasing the octane number in gasoline, used on an industrial scale. Oil and Gas Studies. 2020;(3):89-99. (In Russ.) https://doi.org/10.31660/0445-0108-2020-3-89-99
Views:
894
Email this article 
Post a Comment 