The estimation of the metal collapsible pipeline limit displacements from its zero position
https://doi.org/10.31660/0445-0108-2022-1-67-80
Abstract
These days special oil pipelines, which are made with the conesocket connection technology, are widely used. However, it is still not clear how these pipelines react under the influence of forces. Also, there is no data, which could be used to estimate the possibility of pipeline usage after the impact of these forces. The main idea of this article is to find such limit displacements from the pipeline zero position, which would ensure the possibility of the pipeline usage in future. In such case this article uses the methods for finding the equivalent model of the conesocket connection and estimating the values of contact stresses. The result described in the article provides limit transverse displacements data by the number of the linked joints, which ensure the possibility of the pipeline usage in future, if they are not reached during the operation. The results provided in this article will enable to estimate the oil pipeline performance, repair and replacement.
About the Authors
M. N. Zakharov
Bauman Moscow State Technical University
Russian Federation
Russian Federation
Mikhail N. Zakharov, Doctor of Engineering, Professor at the Department of Fundamentals of Machine Design
Moscow
D. S. Martynov
Bauman Moscow State Technical University
Russian Federation
Russian Federation
Dmitry S. Martynov, Postgraduate, As-sistant at the Department Fundamentals of machine design
Moscow
References
1. Huitt, W. M. (2007). Piping for Process Plants, Part 1: The Basics. Chemical Engineering, (2), pp. 42-47. (In English).
2. Huitt, W. M. (2007). Piping for Process Plants, Part 2: Flanges. Chemical Engineering, (3), pp. 56-61. (In English).
3. Huitt, W. M. (2007). Piping for Process Plants, Part 4: Codes and Fabrication. Chemical Engineering, (10), pp. 68-76. (In English).
4. Huitt, W. M. (2008). Piping for Process Plants, Part 6: Testing and Verification. Chemical Engineering, (6), pp. 48-54. (In English).
5. Makarychev, A. A. (2013). The economic rationale for lining of regional gas pipelines. Scientific review. Series 1: Economics and law, (3-4), рр. 67-71. (In Russian).
6. Huitt, W. M. (2008). Piping for Process Plants, Part 5: Installation and Cleaning. Chemical Engineering, (4), рр. 4-58. (In English).
7. Zakharov, M. N., & Martynov, D. S. (2019). Metodika ispytaniya germetichnosti sbornykh soedineniy trubchatykh elementov tekhnologicheskikh mashin pri vneshnikh vozdeystviyakh. Aktual'nye problemy sovremennoy nauki: sostoyanie, tendentsii razvitiya. Proceesings of the 3rd All-Russian Conference. Tom 1, chast' 2. Cherkessk, November, 15, 2019. North Caucasian State Academy Publ., pp. 67-71. (In Russian).
8. Taranov, R. A., & Gumerov, A. K. (2014). Strength substantiation of conesocket design of pipeline connections. Problems of Gathering, Treatment and Transportation of Oil and Oil Products, (4(98)), рр. 118-122. (In Russian).
9. Taranov, R. A., Gumerov, K. M., & Siraev, A. G. (2014). Test of conesocket connections of pipes. Problems of Gathering, Treatment and Transportation of Oil and Oil Products, (4(98)), рр. 108-117. (In Russian).
10. Taranov, R. A. (2015). Povyshenie bezopasnosti neftepromyslovykh truboprovodov na osnove sovershenstvovaniya tekhnologii montazha. Diss. … kand. techn. nauk. Ufa, 140 p. (In Russian).
11. Zakharov, M. N. (2002). Metodologiya otsenki nesushchey sposobnosti magistral'nykh truboprovodov s lokal'nymi defektami. Diss. … dokt. techn. nauk. Moscow, 285 p. (In Russian).
12. Zakharov, M. N. (2000). Prochnost' sosudov i truboprovodov s defektami stenok v neftegazovykh proizvodstvakh. Moscow, Gubkin University Publ., 216 p. (In Russian).
13. Bulatova, A. Z., Zakharov, M. N., & Morozov, E. M. (2010). Assessment of the risk of segregation in metal structures on the basis of crack resistance diagram. Industrial laboratory. Materials diagnostics, 76(3), рр. 4146. (In Russian).
14. Zakharov, M. N., & Luk'yanov, V. A. (1997). Otsenka prochnosti trub s vyyavlennymi vnutritrubnoy diagnostikoy defektami. Zashchita ot korrozii i okhrana okruzhayushchey sredy, (1-2), pp. 9-11. (In Russian).
15. Zakharov, M. N., & Luk'yanov, V. A. (2000). Prochnost' magistral'nykh truboprovodov s lokal'nymi defektami. Nadezhnost' i sertifikatsiya oborudovaniya dlya nefti i gaza, (12), pp. 51-55. (In Russian).
16. Kolosov, S. P. (2012). Kombinirovanie metoda konechnykh elementov v raschete nagruzok na uchastkakh truboprovoda virtual'noy modeli. Quality Management in Oil and Gas Industry, (2), рр. 31-34. (In Russian).
17. Feodos'ev, V. I. (1999). Soprotivlenie materialov. Moscow, Bauman Moscow State Technical University Publ., 592 p. (In Russian).
18. Kostenko, N. A., Balyasnikova, S. V., Voloshanovskaya, Yu. E., Gulin, M. A., Rusanova, E. M., Tikhonova, O. N., & Yumatov, V. P. (2004). Moscow, HSE University Publ., 430 p. (In Russian).
19. Reshetov, D. N. (1989). Detali mashin. Moscow, Mashinostroenie Publ., 496 p. (In Russian).
20. Zakharov, M. N. (2000). Kontseptsiya mekhanizma prinyatiya resheniy o vyborochnom remonte magistral'nykh truboprovodov. Neft', gaz i biznes, (4), pp. 23-28. (In Russian).
Review
For citations:
Zakharov M.N., Martynov D.S. The estimation of the metal collapsible pipeline limit displacements from its zero position. Oil and Gas Studies. 2022;(1):67-80. (In Russ.) https://doi.org/10.31660/0445-0108-2022-1-67-80
Views:
258
Email this article 
Post a Comment 