POSSIBILITIES OF MODELING OF COMPOSITIONS OF ALLOYS Fe-Ni-Co AIMING TO FORECAST THE PHASE TRANSFORMATIONS
https://doi.org/10.31660/0445-0108-2017-5-124-128
Abstract
In the paper the possibility of use of computational modeling for prediction of processes of phase transformation by example of small series of Fe-Ni-Co alloys has been shown. Due to complexity of structure for-mation processes in these alloys the relation between modeling and experimental work was described. Modeling allows to predict basic transformations in alloys, but it doesn`t display the real composition of structural components.
About the Authors
A. S. Zhilin
Ural Federal University named after the first President of Russia B. N. Yeltsin
Russian Federation
Russian Federation
J. W. Newkirk
Missouri University of Science and Technology
Russian Federation
Russian Federation
T. .. Amine
Missouri University of Science and Technology
Russian Federation
Russian Federation
V. R. Ramazanova
Ural Federal University named after the first President of Russia B. N. Yeltsin
Russian Federation
Russian Federation
V. V. Tokarev
LLC «First foundry»
Russian Federation
Russian Federation
References
1. Masayuki Shiga. Invar alloys // Current Opinion in Solid State and Materials Science. - 1996. - Vol. 1, Issue 3. - P. 340-348
2. Precision castable alloy of invar class for operating temperatures up to 500 °C / V. I. Chermenskii [and etc.] // Metal Science and Heat Treatment. - January 2011. - Vol. 52. - P. 504-507
3. Особенности формирования структуры в суперинварных сплавах, дополнительно легированных углеродом / А. С. Жилин [и др.] // Известия высших учебных заведений. Нефть и газ. - 2014. - № 1. - С. 91-94
4. Thermal properties and structure of cast carbon-containing invar and superinvar alloys after two-stage annealing / S. V. Grachev [and etc.] // Metal Science and Heat Treatment. - July 2013. - Vol. 55. - P. 124-128
5. Ha T. K., Min S. H. Effect of C content on the microstructure and physical properties of Fe-36Ni invar alloy // Materials Science Forum. - 2015. - Vol. 804. - P. 293-296
6. Influence of carbon addition on structure and thermal properties of cast superinvar alloys / A. S. Zhilin [and etc.] // Procedia Materials Science. - 2014. - Vol. 5. - P. 173-180
Review
For citations:
Zhilin A.S., Newkirk J.W., Amine T..., Ramazanova V.R., Tokarev V.V. POSSIBILITIES OF MODELING OF COMPOSITIONS OF ALLOYS Fe-Ni-Co AIMING TO FORECAST THE PHASE TRANSFORMATIONS. Oil and Gas Studies. 2017;(5):124-128. (In Russ.) https://doi.org/10.31660/0445-0108-2017-5-124-128
Views:
368
Email this article 
Post a Comment 